Translate:

Model: DNB-WS-20.075/AQ14989

Product Category: Converter


Features
Internal LOcheck 
Internal Referencecheck 
DownConvertercheck 
Block Convertercheck 

Frequency Ranges
 

Electrical Specifications
Number of Channels1 
Conversion Gain Min.35dB
Conversion Gain Typ.38dB
ConversionGaindBMax41 
Noise Figure15dB
Output Power Min.18dBm

Temperature Ranges
 

Humidity
Humidity100%
NonCondensing0 

Physical
Length12.61Inches
Width7.5Inches
Height3.38Inches
Weight6818grams

Package Types
PackageWeather Proof 
 
Documents for
DNB-WS-20.075/AQ14989

Datasheet:
D-327 (PDF)

Manual:
DNB-WS-20.7 (PDF)


ECCN: EAR
 
 
 

Similar Models
DNB-WS-20.7
DNB-WS-20.7-1

Available Options for DNB-WS-20.075/AQ14989:

OptionDescriptionDetails
Option 1High performance Dual Conversion (DNB-WS-3.8 ONLY, UPB2 or DNB2
Option 1High Performance Package
Option 2Lower Gain/Upconverter
Option 3Lower Gain/ Downconverter
Option 8LO Level Detect
Option 8Lo Level Detects Dual conversion (DNB-WS-3.8 ONLY, UPB2 or DNB2)
Option 10Higher Frequency Stability Reference+/-5 x 10E-9, -40 to +60C 1 x 10E-9/day typical (fixed temperature after 24 hour on time).
Option 14Low noise option (18.30-18.80 GHz) 18.30-18.80 Frequency
Option 19ADC power input (Obsolete See Option 19D+24 to +32 VCD input DC+ PIN 1 DC- PIN 2 GND PIN 3 N/C PIN 4
Option 19BDC power input +42-+60 VDC input
Option 19CDC power input -42 to -60 VDC input
Option 19DDC Power Input+24 to +32 VDC input N/C PIN 1 DC- PIN 2 GND PIN 3 DC+ PIN 4
VMVertical Mount
Option 21-1Amplitude Slope Adjustment0 to 1 dB minimum slope adjustment over 500 MHz IF BW 0 to 1.5 dB minimum slope adjustment over 800 MHz IF BW 0 to 2 dB minimum slope adjustment over 1000 MHz IF BW 0 to 3 dB minimum slope adjustment over 1500 MHz IF BW
Option 27(1)Rear Panel RF waveguide connector option. RF ouput on rear panel as per outline on pages 6 and 71. WR-34 input per low noise outline.
Option 28BL-Band fiber optic interface (available 0.95-2.15GHz) B. Fiber: 9/125 single mode fiber. Wavelength: 1300-1560 nm, Connector:FC/APC1. Upconverter input receiver supplied with 1/3 rack transmitter
Option 29ARF-band fiber optic interace (available 0.95-18 GHz) A. Fiber: 9/125 (Single mode fiber), Wavelength: 1540-1560nm, Optical power in fiber: 4mW typical, Connector: FC/APC1. Upconverter ouput transmitter supplied with a 1/3 rack receiver
Option 29BRF-band fiber optic interface (available 0.95-18 GHz) B. Fiber: 9/125 (Single mode fiber), Wavelength: 1300-1560 nm, Connector: FC/APC1. Downconverter input receiver supplied with 1/3 rack transmitter

Options may not apply to all models.

Return to: Converters

Please review the product PDF which contains the full and complete specifications.
For conflicts between the information on this page and the product PDF, the product PDF takes precedence.

 
Narda-MITEQ · 435 Moreland Road · Hauppauge NY 11788 USA · 631-231-1700
FacebookLinkedInX (Twitter)