Translate:

Model: U-9858-5-1K

Product Category: Converter


Features
Internal LOcheck 
Internal Referencecheck 
Upconvertercheck 

Frequency Ranges
 

Electrical Specifications
Number of Channels1 
Conversion Gain Min.30dB
ConversionGaindBMax35 
Noise Figure18dB
Output Power Min.15dBm

Temperature Ranges
 

Humidity
Humidity95%
Humidity Degrees30?C
NonCondensing0 

Physical
Length20Inches
Width19Inches
Height1.75Inches
Weight6900grams

Package Types
PackageRack Mount 
 
Documents for
U-9858-5-1K

Datasheet:
D-325 (PDF)


ECCN: EAR
 
 
 

Similar Models
U-9855-2-1K
U-9856-7-1K

Available Options for U-9858-5-1K:

OptionDescriptionDetails
(Option 1)Level Control Option 45dB
(Option 4)140 MHz IF Frequency
(Option 5)Group Delay Equalization1 ns p-p maximum/70 +/-18MHz IF 2 ns p-p maximum/140 +/-36MHz IF With option 20, price is $5000
(Option 8)LO Level Detect
(Option 10C)Higher Frequency Stability
(Option 10E)Analog reference Phase Lock
(Option 10G)Tracking Reference High Stability+/-5 X 10-9, 0 to 50C 1 X 10-9/day typical (fixed temperature after 24 Hour) This option replaces Option 10E
(Option 10H)Tracking Reference High stability+/-2 X 10-9, 0 to 50C 1 X 10-9/day typical (fixed temperature after 24 Hour) This option replaces Option 10F
(Option 15)50 Ohm IF Impedance
(Option 16C)55 dB Nominal RF/IF Gain
(Option 17C)RS232 Remote Interface
(Option 20)Selectable IF FrequenciesL, S, C and Ku Option
(Option 18-4)Four IF Outputs
(Option 18-8)Eight IF Outputs
(Option 31A)Ultra low phase noise (see data sheet for Phase Noise specifications chart).Option 10E (analog reference phase lock) supplied as standard and internal reference U-link provided (an external 10 MHz reference may be applied). Higher frequency stability available for details. See options 10 and 10F.
(Option 31D)10 MHz external reference only @ +4 +/-3 dBm.For ultra low phase noise reference (no reference suppression or direct reference multiplication inside 100 kHz. See data sheet for required phase noise
(Option 31C)5 MHz external reference only @ +4 +/-3 dBm.For ultra low phase noise reference (no reference suppression) or Direct reference multiplication inside 10 kHz. See data sheet for required phase noise.
(Option 31B)Ultra low phase noise (see data sheet for Phase Noise specifications chart) Includes Option 10FOption 10F (analog reference phase lock) supplied as standard and internal reference U=link porvided (and external 10 MHz reference may be applied.
(Option NRF)Type N RF Connector RF connector (Note: Monitor remains SMA female). RF return loss: 18 dB, 9-15 GHz, not available above 15 GHz.
(Option TNCIF)Type TNC female IF connector and IF monitor
(Option TNCRF)Type TNC female RF connector (Note: Monitor remains SMA female). RF return loss: 18 dB, 9-15 GHz, not available above 15 GHz.
SLD EXTSlide extension 6"Slide extension 6"

Options may not apply to all models.

Return to: Converters

Please review the product PDF which contains the full and complete specifications.
For conflicts between the information on this page and the product PDF, the product PDF takes precedence.

 
Narda-MITEQ · 435 Moreland Road · Hauppauge NY 11788 USA · 631-231-1700
FacebookLinkedInX (Twitter)